Dutch Boy® Nalcrete™ Gloss Latex 7710
PACKAGING:
1-Liter, 4-Liters, and 16-Liters
FINISH:
Gloss
APPLICATION:
By brush, roller, or airless spray
VOC:
12.1 g/L
PRACTICAL COVERAGE:
30 to 35 square meters
DRY THROUGH:
To touch: 1 hour
To recoat: 2 hours
THINNING SOLVENT:
Use as supplied. If necessary, thin with not more than ½ Liter of clean water per 4L can.
TINTING:
Various pastel shades may be obtained by tinting with Dutch Boy® ACRY-TINT™ water-based colorants. Take note that 7366 Hansa Yellow and 7371 Toluidine Red are for interiors only.
CLEAN UP SOLVENT:
Water
SURFACE PREPARATION:
New Concrete
New concrete should be allowed to dry for 14 to 28 days under normal weather conditions before paint application. Surface to be painted should be clean, dry, free from oil, grease, dust, dirt, and other contaminants. If painting must be done immediately within the 14 to 28 day curing period, treat the surface with a solution of 1 part Dutch Boy® Nalcrete™ Masonry Neutralizer 7000 diluted in 16 parts water. Apply the solution liberally using a brush or roller. Let dry overnight before rinsing with water to remove white crystal that will have formed on the surface. Let dry before painting. If the concrete has been cured for 28 days or more, there is no need to apply a neutralizer.
Drywall Substrates
Install and secure joints as per manufacturer’s recommendations.
Repainting
Remove all loose, scaling, flaking, and peeling paint manually or by using a paint and varnish remover. Wash surfaces until clean and completely remove any residue. Let dry.
In case of mildew infestation, treat with a bleach solution (1:3 laundry bleach to water, respectively) by swabbing or brushing. To ensure proper treatment, let stand for 24 hours before washing off residue. Let dry.
PAINTING SCHEDULE:
Primer
Dutch Boy® Nalcrete™ Flat Latex 7510
Putty
Interiors-Dutch Boy® Nalcrete™ Concrete Putty 7211
Exteriors-Dutch Boy® Tex-a-crete™ Cast 3211
2nd and 3rd coat
Dutch Boy® Nalcrete™ Gloss Latex (in any color)