Dutch Boy® Classic™ Semi-Gloss Enamel 6610

Dutch Boy® Classic™ Semi-Gloss Enamel is a durable, alkyd-type paint. It is formulated to give a tough, beautiful, and high build film on interior and exterior wood and metal surfaces. Its superior hiding properties, combined with a semi-gloss finish, makes it easier to clean and resistant to wear and abrasion.

Share :

Share on Facebook Share on Twitter Share on Google Plus

PACKAGING: 
4-Liters and 16-Liters

FINISH:
Semi-Gloss

APPLICATION:
Apply by brush or roller.

PRACTICAL COVERAGE:
30 to 35 square meters

DRY THROUGH:
To touch: 2 hours
To recoat: 8 hours
Full cure: 3 days

THINNING SOLVENT: 
Use only Dutch Boy® Paint Thinner 6000

TINTING: 
Use Dutch Boy® Super Tint Oil Tinting Colors for minor color adjustments only.

CLEAN UP  SOLVENT: 
Dutch Boy® Paint Thinner 6000

SURFACE PREPARATION: 
Wooden Surfaces
Surfaces to be painted should be clean and dry, free from oil, grease, dust, dirt, and all loose grit and mortar. Hammer all nails deep enough to apply putty. Sand rough wood until smooth and then dust off before painting.

Scrape off all loose, scaling, flaking, and peeling paint manually. Wash surfaces clean and completely remove chemical residue. Let it dry then prime with Dutch Boy® Classic™  Flatwall Enamel before recoating.

Metal Surfaces
Wipe the surface with a rag soaked in paint thinner to remove grease, oil, wax and other foreign matter. For new, galvanized surfaces, etch the surface by applying a metal etching solution. Rinse with water and dry immediately.

Unpainted galvanized surfaces that have been exposed for 6 months or more need not be etched.

For recoating pre-painted galvanized surfaces in good condition, sand lightly wipe the surface with a clean rag before applying paint. Remove all loose paint film to sound surface. Spot prime bare substrate.

For corroded galvanized surfaces, remove rust by wire brushing and use a metal etching solution. Let it stay for 10-15 minutes. Be sure to wash surface thoroughly with water and solvent wipe to dry. Immediately prime after drying.

PAINTING SCHEDULE:
Primer
Dutch Boy® Classic™ Flatwall Enamel 6510

Putty
Dutch Boy® Glazing Putty 6210

Top Coat
Dutch Boy® Classic™ Semi-Gloss Enamel 6610