Dutch Boy® Dead Flat Lacquer 2500

Dutch Boy® Dead Flat Lacquer is a nitrocellulose, solvent-based, flat lacquer varnish that dries to a hard, durable film.

Share :

Share on Facebook Share on Twitter Share on Google Plus

PACKAGING: 
1-Liter, 4-Liters, and 16-Liters

FINISH:
Flat

APPLICATION:
Apply by spray.

PRACTICAL COVERAGE:
25 to 30 square meters

DRY THROUGH:
To touch: 30 minutes
To recoat: 1 hour

THINNING SOLVENT: 
Dutch Boy® Lacquer Thinner 2000

CLEAN UP  SOLVENT: 
Dutch Boy® Lacquer Thinner 2000

SURFACE PREPARATION: 
New Wood
Surface to be painted should be clean and dry, free from dust, dirt, and other contaminants. Hammer all nails deep enough to apply putty. Sand rough wood until smooth then dust off surface before painting. Make sure to use kiln-dried wood.

Repainting
Old finish in bad condition should be stripped. If old lacquer finish is in good condition, sand surface. Make sure to clean and dry surface before coating.

PAINTING SCHEDULE:
Sealer
Dutch Boy® Lacquer Sanding Sealer 2100

Final Coat
Dutch Boy® Dead Flat Lacquer 2500